Skip to content
Na⁺

Sodium

Flame photometricResult in mg/LIS 3025 (Part 45)

Flame photometer reading

Formula
Na =C×DF

Your readings

2 of 2 filled

Example values shown.

mg/L
Sodium as NaCalculated live as you type
62.00 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How sodium is calculated

Free sodium calculator (flame photometric method), following IS 3025 (Part 45). Enter 2 readings to get sodium as Na in mg/L, with the formula filled in step by step.

  1. Sodium as Na · mg/L

    Na = C × DF

What you need

SymbolReadingUnitNotes
CSodium read from the standard curvemg/Lusually 0–100 mg/L
DFDilution factor—usually 1–1000

Worked example

Readings:

  • Sodium read from the standard curve: C = 12.4 mg/L
  • Dilution factor: DF = 5
  1. Sodium as Na

    Na = 12.4 × 5 = 62.00 mg/L

Result: Sodium as Na 62.00 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of Na: 23).

Questions

How do you calculate sodium by the flame photometric method?

Sodium as Na = C × DF. Here C is the sodium read from the standard curve (mg/L), DF is the dilution factor. The result is in mg/L.

What unit is sodium reported in?

Sodium as Na is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of Na: 23).

Which standard does this sodium calculation follow?

It follows the calculation in IS 3025 (Part 45). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With sodium read from the standard curve = 12.4 mg/L, dilution factor = 5, the result is sodium as Na = 62.00 mg/L.

Is this sodium calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.