How total hardness is calculated
Free total hardness calculator (EDTA titrimetric method), following IS 3025 (Part 21). Enter 5 readings to get total hardness as CaCO₃ in mg/L, with the formula filled in step by step.
Total hardness as CaCO₃ · mg/L
TH = (A − B) × C × 1000 × D / V
What you need
| Symbol | Reading | Unit | Notes |
|---|---|---|---|
| V | Volume of sample taken | ml | usually 1–1000 ml |
| B | EDTA used for blank | ml | usually 0–2 ml |
| A | EDTA used for sample | ml | usually 0–50 ml (a 50 ml burette) |
| D | Dilution factor | — | usually 1–1000 |
| C | mg CaCO₃ equal to 1.0 ml EDTA | mg/ml | usually 0.5–1.5 mg/ml |
Worked example
Readings:
- Volume of sample taken: V = 50 ml
- EDTA used for blank: B = 0.1 ml
- EDTA used for sample: A = 10.7 ml
- Dilution factor: D = 1
- mg CaCO₃ equal to 1.0 ml EDTA: C = 1 mg/ml
Total hardness as CaCO₃
TH = (10.7 − 0.1) × 1 × 1000 × 1 / 50 = 212.0 mg/L
Result: Total hardness as CaCO₃ 212.0 mg/L.
Checks and units
- Typical values: Most water samples: up to 2,000 mg/L
- The sample titre (A) is less than the blank (B), so the result would be negative.
- Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of CaCO₃: 50).
Questions
How do you calculate total hardness by the EDTA titrimetric method?
Total hardness as CaCO₃ = (A − B) × C × 1000 × D / V. Here V is the volume of sample taken (ml), B is the EDTA used for blank (ml), A is the EDTA used for sample (ml), D is the dilution factor, C is the mg CaCO₃ equal to 1.0 ml EDTA (mg/ml). The result is in mg/L.
What unit is total hardness reported in?
Total hardness as CaCO₃ is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of CaCO₃: 50).
Which standard does this total hardness calculation follow?
It follows the calculation in IS 3025 (Part 21). Check it against the current edition of the standard and your lab’s SOP before reporting.
Can you show a worked example?
With volume of sample taken = 50 ml, EDTA used for blank = 0.1 ml, EDTA used for sample = 10.7 ml, dilution factor = 1, mg CaCO₃ equal to 1.0 ml EDTA = 1 mg/ml, the result is total hardness as CaCO₃ = 212.0 mg/L.
What is a typical total hardness value?
Most water samples: up to 2,000 mg/L
What mistakes should I look out for?
The sample titre (A) is less than the blank (B), so the result would be negative.
Is this total hardness calculator free?
Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.
Related calculators
Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.